Specifications: Fluke FLK-IRR1-SOL Solar Irradiance Meter
| Irradiance | |
| Measuring Range | 100 to 1400 W/m² |
| Resolution | 1 W/m² |
| Measuring Accuracy | ± (5 % + 5 Digit) |
| Note: Irradiance measurement accuracy is specified for an angle of incidence ≤35 degrees from the sun at AM1.5 (ASTM G-173) spectrum. | |
| Temperature Measurement | |
| Measuring range (°C) | -30 °C to 100 °C (-22 °F to 212 °F) |
| Resolution | 0.1 °C (0.2 °F) / 1 °F @>100 °F |
| Measuring Accuracy | "±5 °C (±9 °F)@ -10 °C to 75 °C (14 °F to 167 °F), ±8 °C (±14.5 °F)@ -30 °C to -10 °C (-22 °F to 14 °F), and 75 °C to 100 °C (167 °F to 212 °F)" |
| Note: Temperature measurement response time: ~30 sec. | |
| Inclination Angle | |
| Measuring Range | -90° to +90° |
| Resolution | 0.1° |
| Measuring Accuracy (typical) | ± 1.5°@ -50° to +50° ±2.5° @ -85° to -50° and +50° to +85° ±3.5° @ -90° to -85° and +85° to +90° |
| Compass | |
| Measuring Range | 0° to 360° |
| Resolution | 1° |
| Measuring Accuracy | ±7° |
| Note: a) Measurements valid for device inclination between -20° and +20° to horizontal. Outside that range on LCD will be shown "---". b) Result is referred to magnetic north. | |
| Temperature | |
| Operating Temperature IRR1-SOL | -20 °C to 50 °C (humidity <80%), noncondensing |
| Operating Temperature 80PR-IRR | -30 °C to +100 °C |
| Storage Temperature | -30 °C to 60 °C (humidity <80%) |
| Altitude | 0 m to max. 2000 m |
| Electromagnetic Compatibility (EMC) | |
| International | IEC 61326-1: Portable Electromagnetic Environment |
| CISPR 11: Group 1, Class A | |
| Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for radio frequency energy that is necessary for the internal function of the equipment itself. Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. | |
| Caution: This equipment is not intended for use in residential environments and may not provide adequate protection to radio reception in such environments. | |
| Korea (KCC) | Class A Equipment (Industrial Broadcasting & Communication Equipment) |
| Class A Equipment (Industrial Broadcasting & Communication Equipment) Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. | |
| USA (FCC) | 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. |
| Protection | |
| IP Protection | IP40 |
| Power Supply & Battery Life | |
| Batteries | 4 AA Alkaline Batteries |
| Battery Life (typical) | 50 hours (≤9000 readings) |
| Auto Power Off | 30 minutes |
| Dimensions | |
| L x W x H | 150 x 80 x 35 mm (5.90 x 3.14 x 1.37 in) |
| Weight | 231 g (0.5 lb) |